In order to protect the hinge drilling machine and achieve the optimal working effect in use, we should pay attention to some instructions. Firstly, the right drill or bit shall be selected according to the target object. The corresponding drilling rate shall be selected according to the target object. Too fast drilling will heat up the drill and soften some low-melting materials, thus damaging the target. Too slow drilling will cause the adhesion of soft materials, or even twining of the machine. The cutting feeding number of the hinge drilling machine is determined according to the required depth and diameter of the drill hole. The hinge drilling machine shall be well protected in terms of both equipment itself and the operator as high-speed rotary feeding equipment.
The drill is the most worn component when using the hinge drilling machine and its sharpness determines the processing level of target object, as well as and the processing progress. Therefore, the wearproof drill in high quality shall be selected, which shall be replaced or polished after a certain period of use, so that the drill bit has a high working state. It is inevitable that much dust will enter the machine in operation, for which, the equipment should be lubricated frequently, and the lubricating oil should be added at certain intervals.
Every employee should take care of the equipment. If it is not properly protected, the equipment work efficiency, even the product quality will be effected, leading to an adverse impact on the company's credibility.
1. Select the appropriate drill or bit according to the target object.
2. Adjust the appropriate drilling speed according to the target object. Too fast drilling will soften low-melting materials, and too slow drilling will cause the adhesion of soft materials.
3. Determine the cutting feeding number of the hinge drilling machine according to the required depth and diameter of the drill hole.
4. Pay special attention to safety as the hinge drilling machine will be feeding at a high speed.
5. Pay attention to ensure the drill sharpness, and regularly polish or replace it.
6. Lubricate the drill shaft regularly.
